This is an extremely flexible machine for application of PVC/ABS or Veneer on straight or shaped panels. The Edge Banding is a semi-automatic machine for curvilinear work piece, wherein the predefined length of PVC/ABS to be glued to the laminate can be set for repetitive work piece and the digital temp.
• Pneumatic cutting device for pre-defined length, with foot switch.
• Electronic digital millimeter counter to adjust the length
• Glue roller apply glue on board & tape for perfect bonding
• German gearbox for smooth & power drive with long life synthetics lubrication.
• Easy regulation of variable speed 4 to 12 m/min
• Revolving edge coil holder plate 525 mm. Ø
• Automatic lowering of the glue temperature after a temporary non-use of the machine
• Hard chrome steel rollers to support & guide the work piece
• Working table with specially designed hylum surface for heat insulation & frictionless movement of work piece
• Tilting working table from 0° to 45° with height adjustment up to 3 mm
• Electronic digital temp. controller with safety circuit, which allows to start the drive motor only when the hot glue has reached the set temperature
Note : J-3000.in Single phase machine available on request
A specially designed hylum surface working table can be tilted from 0° to 45°
A user friendly electro-pneumatic control panel which monitors & controls the operation
The pneumatic cutting device can be set to actuate the pneumatic cutter to cut the band for a pre-defined length using an electronic counter
The glue in the glue pot, glue leveler, wiper, the extrusion screw and the heating element all make a bonding system, which gives an effective & efficient banding to the work piece.
Specially design height adjusting steel roller give perfection to edge band for proper fixing with work piece.
| Details | Unit | J-3000.in |
| Table size (L x B) | mm | 1150 x 920 |
| Minimum work piece length | mm | 280 |
| Work piece thickness range | mm | 10-50 |
| Edge banding thickness for PVC / ABS in coil form | mm | 0.4 - 2.0 |
| Min-radius for curved edging | mm | 20 |
| Glue pot capacity | kg | 3 |
| Variable feed | m/min. | 4 to 12 |
| Front table adjustment (Up & Down) | mm | 3 |
| Front table tilt angle | Degree | 0° to 45° |
| Maximum setting temperature | °C | 180° |
| Compressed air requirement | hp/kg/cm² | 0.5 / 5.7 |
| Heating element | kw | 1.5 |
| Electric motor | kw | 0.37 (415V, 3Ø) |
| Power supply | voltage/Ø | 415V, 3Ø |
| Total Power | hp | 2.5 |
| Machine dimension (L x B x H) | mm | 1850 x 1000 x 1040 |
| Approx. net weight | kg | 280 |
By subscribing you agree to our Privacy Policy and consent to receive updates from Jai Industries.
Wudpro
Modula
Optimus
uPVC Series
Support
Service Centre
Spare Parts
Contact us
Documentation
© 2023 Created
