• Complete stability even at maximum feeding speed of 25 m/min due to robust machine structure.
• User friendly Smart Touch PLC control panel.
• 4 Pressure Rollers for perfect pressing.
• Fine Trimming Unit enables better finish on edge.
• Diamond Cutters for Pre-Milling & Trimming.
• Heavy Duty Gear Box & Motor for conveyor.
• Motorized up-down movement of pressure beam for easy thickness setting for quick operation from control panel.
• Automatic lubrication system circulates lubrication to the required parts of the machine, ensures efficient operation and increase life of parts.
• Safety air tank provision for non-dropping of air during process.
• Low maintenance m/c, easily available cost effective spares, best after sales service support.
Note : OptiEdge 5.5 without Pre-Milling also available
| Technical Specification | Unit | OptiEdge 5.5P |
| Work piece thickness range | mm | 10-60 |
| Minimum work piece width | mm | 60 |
| Edge banding thickness for PVC & ABS in coil form | mm | 0.4 - 3.0 |
| Work piece feeding speed | m/min | up to 25 |
| Pre-milling motor power | no/hp | 2 x 3 |
| End cutting motor power | no/hp | 2 x 0.5 |
| Fine trimming motor power | no / hp | 2 x 1 |
| Round cornering motor power | no/hp | 2 x 0.5 |
| Buffing motor power | no/hp | 2 x 0.5 |
| Conveyor motor power | hp | 3 |
| Air pressure required | kg/cm² | 6 to 8 |
| Working temp. range | °C | 180 - 200 |
| Glue pot capacity | kg | 4 |
| Total power | hp | 19.4 |
| Machine dimension (L x B x H) | mm | 6100 x 1100 x 1600 |
| Approx. net weight | kg | 2000 |
